Wurlitzer 2600 model 543 amp Error on schematic?

[repairman]

I finished a recap on this Wurlitzer 543 model amplifier.  I was double checking my wiring and found a problem.

I have attached two photos.  The photo I took before replacing Cap 23 A to D which is a multi-can.

The other attachment is the schematic.  I have made a correction showing the two purple wires.  On the first photo, one purple goes to the resistors on the muting socket and the other purple wire goes to resistors R5, R11, and R15.  The Red wire goes to the two R8 resistors. The Orange wire goes to C23A  30uf 500v.  Finally the Yellow wire goes to C23D a 25uf 50v.

Does anyone have a corrected schematic?

Has anyone done a re-cap and run into this problem?

I want to make sure before I connect power to the amp (through a dim bulb).

Thank you for your help.

Here are the photos

[jukenorman]

You can only see thumbnails of your photos on that website, unless you register! But I also see that you had a couple of replies there.

Norman.