AMI Model I electric Credit unit does not advance to credit

[springer]

Hi to all this is my first post, also the first Juke Box i am working on.
I am trying to assemble my I out of the cabinet to see if it is basically working , after i cleaned it and before i refresh the motors. the rest is being painted and i have re done the chrome bits
It has a dual credit unit, i believe that the credit cancelling solenoid on the pulse generator is modified not to cancel. 9some sort of free play i suppose)
Anyway i have tuned the credit unit and the pulse generator mechanically as per the manual.
So as i give a credit to the credit unit and the lights light up, i believe that the pulse generator wiper should go from home rivet to the credit rivet , but it doesnt. if i advance it to credit rivet and i select a song it makes the whole selection routine.
Any ideas?

[jukenorman]

You say you have given "a" credit, have you tried advancing it further? It might be that the credit unit is set such that a single unit of credit is not sufficient for a selection. Failing that, check this thread, it covers an H but it will be the same arrangement and contains a simplified schematic.
jukeboxaddicts.proboards.com/thread/4139/h200-blade-stop-home-posistion

Norman.

[springer]

Thank you Norman, yes i ve given credits to the limit, tried many times, i ve seen the post , i believe the I is same as the H. I will try today to check again all the switches involved.

[springer]

So... it was a matter of the start switches not correctly adjusted. I made the wiper go to the credit position, however another problem started as the fuse for the pulse converter started blowing. It seems that i need to adjust thοse 3 switches more carefully and also the key switches again as it seems that some key switches affect differently the start switches of each bank. Anyway thanks for the heads up, it will need more effort and accuracy.