AMI Model I200e toggle shifter & transfer switch

[springer]

My AMI I200e mechanism (out of the cabinet) now does select discs pushing the pins and can operate and put the disc on the platter only when the toggle bar is positioned manually. In other words when either an odd or even selection is made the toggle shifter solenoids cannot move the bar at one side or the other and to the point where the transfer switch is being operated. Only a minimal movement is seen and a buzz can be felt on the solenoids. If i move the shifter bar to one side or the other, then the disc is put on the platter and at the correct side. 
Any thoughts about that?

[springer]

Ok probably answering it myself. After careful inspection the Toggle pin unit assembly (part F-3560) was once broken and not repaired correctly so it is cracked and binding the movement. So i need now to find that part...

[jukeboxmarty]

Great you found the issue!

Now the tricky part... finding a replacement part!

They occasionally come up on eBay, but you can try Bill Butterfield... find his info listed here:

jukeboxaddicts.proboards.com/thread/4472/newly-updated-parts-suppliers-resources