Wurlitzer 1015 shorted

[dorno]

Hi, My father has a Model OMT USA 3114, Typ 20/16 OMT1015.

Everything was working great on this Jukebox until.

He said the mechanical counter by the 45 turn table (hidden under the selection display) came out of its retaining clip and the back of it where the wires are bumped metal and sparked.

The selection display went dark.

His first instinct was to take the cover off of the selection & credit computer 100-160-200 (thinking there was a fuse that popped) well in doing so he forgot to take a picture of where his jumpers were and like that they were all pulled out.

Well after that he asked for help.

I rotated the turntable, hit the LT white button flicked the service switch on and back off, and not sure exactly what but something caused the selector display to come back on.

I started digging into the jumper locations and figured out the GP when jumpered from 0 and F was free play and the B4 was not completely out and looked like it was jumpered from 0 and 1.

I installed these, and now jukebox will randomly play a record after a certain amount of time(i did not time it yet but probably could if needed).
Now when I make selection the display acts like everything is working fine (display each key stroke, then pauses then display changes back to a one). BUT NO 45 IS PLAYED 

Not sure if the missing jumpers are causing this or something fried on the board.

Thanks in advance for the help.

[jukenorman]

There's a lot of help and documentation on Deutsche Wurlitzer available at flippers.com.
www.flippers.com/wurlitzr.html

Norman.

[dorno]

Update. Got a lot of stuff working.

But the carousel won't spin on startup to find home position. I have to manually push the rotate carousel button and it spins, finds home, then the credit display button turns on.

When in continuous play mode it just keeps playing the same record over and over.

When I put it in service mode and push Button 9 - gripper arm position , the gripper arm is always displaying 9-1 which it says is play mode even when the gripper arm is in the rest position.

When I push Button 8 - check of record carrier It does not spin (but just a note from before, when I do push the manual rotate carrier it does work so the motor is fine and the power going to the motor is fine.)

When I push Button 7 - check of gear box motor,
It plays the current record and returns it like it should.

Any ideas would be great. Thanks.

[jukenorman]

Doesn't item 7a on the flippers.com page I previously referenced cover that?

Norman.

[dorno]

OMG. You, how many times I read that thing? Lol
Looked right over it. Thanks