|
|
Post by donhf100r on Feb 15, 2024 15:59:11 GMT
Going to re install mech after maintenance and cleaning and not sure that i can spot my reference mark after thorough cleaning of the i/s of jukebox.Are there standard measurements as a guideline?I have the complete install and operation manual for the HF100R.
|
|
|
|
Post by jukeboxmarty on Feb 15, 2024 18:04:59 GMT
I'm not sure I'm tracking... Specifically, What are you trying to align?
|
|
|
|
Post by donhf100r on Feb 15, 2024 19:30:54 GMT
the proper position when its seated.Unless it seats correctly w/o any adjustment.
|
|
|
|
Post by jukeboxmarty on Feb 15, 2024 20:03:52 GMT
OK... I guess you mean the entire mechanism.
The mechanism should just slips into place, no adjustment needed.
|
|
|
|
Post by donhf100r on Feb 15, 2024 20:14:52 GMT
Yes entire mech.good to know.TY
|
|
