|
|
Post by reells454 on Mar 25, 2024 22:44:16 GMT
Hello & thanks for accepting! Working on a LPC-1. TSA1, TCC1 & TASU1 were re-capped but functional before re-capping. After installing & powering up, 8/10 fuse on TSA1 blew. I've ordered replacement fuse but wondering what could've caused this? Fuse looks original, thanks Randy
|
|
|
|
Post by Hildegard on Mar 28, 2024 17:38:13 GMT
Hi Randy,
in general, a fuse can look original but is faulty though.
Did you do recapping by yourself or a did a technician do this job. If it was doone by a technician I suggest to contact him. He knows what he did, if teh amp was tested after recapping etc.
If you did it by yourself you would look again at what you did.
If I understand the schematic right, then the 8/10A fuse is right behind the main 117V plug protecting the power transformer.
|
|
|
|
Post by reells454 on Apr 10, 2024 15:25:38 GMT
Correct. I did the work myself and found the problem, positive ground on the TCC1! Ooops. Thank you for the response! Randy
|
|
