|
|
Post by paradisecs on Apr 16, 2018 15:34:26 GMT
I was just reading over a service manual for the SCC9 and TSA9. On the TSA section says for H5 units use alternates parts marked with **. On the SCC9 it says for 50Hz units use alternate parts. What ar H5 or 50Hz units? Would these be European versions that use different transformers? I hadn't noticed this in the SHP and DCC manuals I've looked at.
|
|
|
|
Post by paradisecs on Apr 16, 2018 17:03:07 GMT
Just looked at other manuals and the same thing is there though worded differently depending on the manual. Just curious what it means or what the differences are.
|
|
|
|
Post by Ron Rich on Apr 16, 2018 18:41:15 GMT
First off--there are no SCC-9 or TSA-9 MANUALS--If you are reading the schematics for those units "H" is "Hi voltage" (230-240), and "5" is 50 Hertz. Domestic USA, models are all "L-6", or in later cases, wired for 120 "L" voltage, 60 Hz. Newer units also have provisions for either voltage, and are 5/6 transformers. Ron Rich
|
|
