Post by hendrik on Jun 30, 2024 11:34:39 GMT
Hello,
I'm new here and couldn't find the answer in the FAQ's...
So here is my problem:
I am the owner of a Wurlitzer 2404 for 40 years and it worked fine untill recently the turntablemotor stopt working..
After some oiling and spinning by hand it worked again for a couple of records, but now it stopped defenedly.
I have some technical knowledge, but at a basic level...I've checked all the fuses (5), they are ok, and checked the microswitches inside te cabin, they also look fine.
Maybe I could check the voltage on the motor, there is a connection in the top, how much voltage should there be after the record is on?
Greetings and thanks in advance,
Hendrik
..
I'm new here and couldn't find the answer in the FAQ's...
So here is my problem:
I am the owner of a Wurlitzer 2404 for 40 years and it worked fine untill recently the turntablemotor stopt working..
After some oiling and spinning by hand it worked again for a couple of records, but now it stopped defenedly.
I have some technical knowledge, but at a basic level...I've checked all the fuses (5), they are ok, and checked the microswitches inside te cabin, they also look fine.
Maybe I could check the voltage on the motor, there is a connection in the top, how much voltage should there be after the record is on?
Greetings and thanks in advance,
Hendrik
..