Post by mrb on Jul 14, 2024 23:26:13 GMT
Got my m100b last summer and pretty much down to this one issue...
It came with a vaco/varco jukebox cartridge. The needles were replaced as the others had damage and were bent. I have replaced the pick up wires going to the terminal strip as someone spliced in some wire and the new wires have continuity to the terminal strip. I verified the wire running from the terminal strip to the amp was good as signal went through it and the amp played through the speaker...
So question is... Is the cartridge toast. I took an ohm reading between the two pins and got 10.63 ohms. Anything I might be overlooking.
It came with a vaco/varco jukebox cartridge. The needles were replaced as the others had damage and were bent. I have replaced the pick up wires going to the terminal strip as someone spliced in some wire and the new wires have continuity to the terminal strip. I verified the wire running from the terminal strip to the amp was good as signal went through it and the amp played through the speaker...
So question is... Is the cartridge toast. I took an ohm reading between the two pins and got 10.63 ohms. Anything I might be overlooking.