Seeburg SMC2 wont cancel at end of recod

[joelt1]

Hi, everything on the SMC2 works great except at the end of record it doesn't cancel, any help please, Thanks . Joel

[joelt1]

also, looks like the magnet is in place, thanks, Joel E. T.

[MOPARJOE]

You will need to reject the record at the CPA (on the inside left upper part of the cabinet)... If the record rejects from that switch, then your problem is with the reed switch at the tone arm. If the record does NOT reject when you hit that switch (or the one on the back of the machine), then your problem is in the reject circuit on the Amplifier (the reject circuit runs through the Amp, and through the square plastic mute relay).... Frequently, the problem is dirty/rusty contacts in the mute relay, and popping in a different relay with diagnose/fix the problem.
(Thanks to Bob Aspenleiter for the trouble shooting info)
Joe A. in Cleveland, Ohio

[joelt1]

OK, thanks Joe, I will check it out this weekend, (trying to fix this for a friend) Joel T

[joelt1]

Hi Joe, would you have, or know where I can get a holder (at the tone arm), for the reed switch, the present one has fallen apart, thanks, Joel T

[joelt1]

all set, found on ebay. more problems now, the CPA is acting up, was selecting fine but no more, is the Ron Rich replacement still available? thank you, Joel T

[jukenorman]

You can get it at cdadapter.com

Norman.

[joelt1]

Hi Norman, thank you. Joel T