Post by mikejd34 on Aug 8, 2024 19:36:33 GMT
I’ve finally been able to get the mech to do something on my LPC1 jukebox after recapping the tormat and replacing the tubes and fuses. The mech will scan and try to pick up a record but it seems to be too far to the left (looking from the front). It then gets hung up and blows the main fuse. The tormat contact plunger, transfer arm, and totalizer plunger all appear to be ~1/2” to the right (looking from the rear) of where they should be to play A1. I’m assuming this should be adjusted but I want to make sure before I unnecessarily adjust something
