Post by longy on Oct 13, 2024 18:17:18 GMT
Hi all, firstly I new to the site so please bare with me and thanks in advance for any info given.
I've acquired a Niagara 2 from a family member that passed away recently. On switching on nothing happened at all(nothing).
After a little time looking at the manual I found the main fuse had blown in the amp panel. On replacing the fuse(slow blow) I have lights and the platter is turning continuously. The record arm is in the down position and the clamp is back as though it has loaded a record. The tone arm is in the play position so if I put a record on it plays with sound but when it reaches the end nothing happens, the switch is made and the relay on the amp panel clicks in.
It obviously is not collecting and replacing the record so I'm stumped.
Thanks in advance
I've acquired a Niagara 2 from a family member that passed away recently. On switching on nothing happened at all(nothing).
After a little time looking at the manual I found the main fuse had blown in the amp panel. On replacing the fuse(slow blow) I have lights and the platter is turning continuously. The record arm is in the down position and the clamp is back as though it has loaded a record. The tone arm is in the play position so if I put a record on it plays with sound but when it reaches the end nothing happens, the switch is made and the relay on the amp panel clicks in.
It obviously is not collecting and replacing the record so I'm stumped.
Thanks in advance
