|
|
Post by spinks on Oct 19, 2024 17:35:26 GMT
After replacing the battery on this box that “worked before we moved it” I’m getting an 05-53 error. The outer cam switch seems to be missing a wire - the top post has nothing on it. The harness looks intact with a couple open spots, no loose wires anywhere. Any suggestions on where this lands?
Thanks!
|
|
|
|
Post by spinks on Oct 22, 2024 23:56:46 GMT
|
|
|
|
Post by shrimpeater on Oct 23, 2024 18:26:37 GMT
That top post doesn't look like it ever had a connecter there.Make a connection when closed,and open in the other position.Tells the motor when to stop.
And the plug looks normal as well. They are made this way. To the right of that plug looks like somethng is not plugged in. Power??
|
|
|
|
Post by jaystainbrook on Oct 23, 2024 22:56:55 GMT
Is the outer cam spinning? 05-53 could just be a symptom of the motor not turning and never triggering the switch.
|
|
|
|
Post by spinks on Oct 25, 2024 10:37:50 GMT
That top post doesn't look like it ever had a connecter there.Make a connection when closed,and open in the other position.Tells the motor when to stop. And the plug looks normal as well. They are made this way. To the right of that plug looks like somethng is not plugged in. Power?? Correct, power is unplugged. The entire cd unit is out of the jukebox and on my bench. I assumed if it had a post it should have a connection, which takes me back to a rule I always overlook - never assume anything. Makes sense as to why everything looked factory. Thanks, I’ll keep “plugging”. |
|
