rb
New Member
Posts: 1
|
Post by rb on Aug 13, 2018 17:33:38 GMT
I am working on a NSM jukebox. wondering if there are parts and schematics available for these boxes?
|
|
|
|
Post by Ron Rich on Aug 13, 2018 21:28:37 GMT
Rb,
Please search our FAQ's section, for the answer to this-- Ron Rich
|
|
|
|
Post by canadian on Aug 20, 2018 0:23:35 GMT
|
|
|
|
Post by adrian on Sept 1, 2018 19:08:44 GMT
I have a prestigell ESll with a fault. It selects the record ok but as soon as the needle touches the record it then ejects . it does it everytime. any ideas where i should look ?
|
|
|
|
Post by Ron Rich on Sept 1, 2018 23:03:13 GMT
Hi Adrian,
If it "ejects' the record--you are out of luck-- don't play it !! If it rejects the record upon set down of the needle, look for a shorted reject switch--especially if this phono is new to you. Ron Rich
|
|
|
|
Post by adrian on Sept 2, 2018 8:18:48 GMT
Thanks Ron, shortened reject switch? I will have a look. Is it on the carriage?
I've had the jukebox about ten years - not had any problems with the selecting mechanism before until this week
|
|
|
|
Post by Ron Rich on Sept 2, 2018 12:36:00 GMT
Hi Adrian,
Yes-- or on the rear wall, or "remote"---where ever the volume control is located---- Ron Rich
|
|
|
|
Post by adrian on Nov 26, 2018 18:08:30 GMT
Hi Adrian, Yes-- or on the rear wall, or "remote"---where ever the volume control is located---- Ron Rich hey Ron, you are spot on - I've played about with the reject play at the back where the volume control is and it is this thats broken. I've ordered a new one from USA (i'm in uk) its a RAFI 1.10107. thanks for pointing me in the right direction - I can fix oil leaks and unblock drains but electrics - I'm clueless
|
|
|
|
Post by adrian on Dec 31, 2018 14:57:39 GMT
Hi Adrian, Yes-- or on the rear wall, or "remote"---where ever the volume control is located---- Ron Rich hey Ron, you are spot on - I've played about with the reject play at the back where the volume control is and it is this thats broken. I've ordered a new one from USA (i'm in uk) its a RAFI 1.10107. thanks for pointing me in the right direction - I can fix oil leaks and unblock drains but electrics - I'm clueless
|
|
|
|
Post by adrian on Dec 31, 2018 15:01:44 GMT
Bad news Ron - I got a new reject switch and soldered it in but it hasnt rectified the problem.
Some good news though - The arm works fine on the B side so I'm thinking of taking all the records out and labels and swapping A sides for B sides .
would be great to get it fixed properly but I just dont know where to look next - I got the manual and schematics but I'm not sure
|
|
|
|
Post by Ron Rich on Dec 31, 2018 16:58:59 GMT
Adrian,
I don't recall seeing how NSM worked this switch, but you should be able to see what the difference in operation is between the A and B sides of a record-- Watch it work several times on each side ! Ron Rich
|
|
|
|
Post by jukenorman on Dec 31, 2018 17:17:44 GMT
Just to be clear, are you saying it plays the B sides fine but on the A sides the arm cradle moves across OK but rejects as soon as the needle lands on the record? If so, check out the end of play reed switch and the wiring around it - is it shorting on A sides, for example?
Norman.
|
|
