|
|
Post by vipertblck on Oct 27, 2018 13:49:01 GMT
will do, thanks. also there's no oiling that can be done on this assembly is there for the buttons? some seem a bit tight as if they could use oil. saw nothing in the book about any lube in the assembly though.
thanks
kevin
|
|
|
|
Post by Ron Rich on Oct 27, 2018 14:45:07 GMT
Later manuals suggest oiling "pivot points on treadle bars" -- All of the shafts where they contact the treadle bar, should have a drop of graphite grease applied to the friction point. You many also wish to grease the individual treadle bars, and switch shafts, where they "slide" thru the ES, and at each, "catch point" ( I do so on rebuilding the phonograph, after properly washing the ES, as this was done by the factory). Also, if there happens to be (not on this model ES) "metal, to metal" contact at the top of each button--another "DROP" of Graphite grease. Ron Rich
|
|
