|
Post by tzenisek on Nov 13, 2018 21:47:06 GMT
I am a old tube radio repairman but I picked up a rockola a couple months ago. The problem is it came in many parts. I have gotten some of it put back together but can't figure pout how the gears on the turn over work, and how they go0 back together. Woundering if some out there could send mme pictures of these gears installed.
|
|
|
Post by Ron Rich on Nov 14, 2018 0:31:34 GMT
Please read the stickies in the introduction section and follow the "rules"-- Then go to the FAQ's section and order a Service Manual, from a supplier listed there--In it you should find the expanded view of the gripper assembly-- Ron Rich. Board Monitor.
|
|