|
|
Post by paradisecs on Dec 27, 2018 23:54:43 GMT
What gauge wire would you use to replace or extend some wires in the DCC and SHP amp? I probably missed it but I don't see that info on parts sheets.
Stephen
|
|
|
|
Post by Ron Rich on Dec 28, 2018 15:08:13 GMT
Stephen.
What are you wishing to extend/replace, why ? Is this a temporary or permanent replacement/extension ? Ron Rich
|
|
|
|
Post by paradisecs on Dec 28, 2018 15:40:44 GMT
I have an SHP that is missing the fuse socket as well as several wires to/from the bias pots and wires at the relay socket have been cut. I also need to remake the 4 jumper wires to the driver board. Nothing that is difficult to replace I'm just not sure what wire would be best suited.
Stephen
|
|
|
|
Post by Ron Rich on Dec 28, 2018 17:17:48 GMT
Stephen,
18-22 ga. stranded silver wire. Ron Rich
|
|
|
|
Post by paradisecs on Dec 28, 2018 18:45:09 GMT
Thanks Ron. Where would I find silver wire? What would happen if copper was used?
Stephen
|
|
|
|
Post by Ron Rich on Dec 28, 2018 18:52:14 GMT
Stephen,
At your local Radio Shack"--oh, forgot--they went broke---
Short copper wires should be fine--
Ron Rich
|
|
