STD Entertainer Chase Lights Not Working

[keving]

Entertainer currently has the chase lights lit up, but no movement. Switched the sequencer from another Entertsiner that has Working chase lights, still same lights standing still. Have tried to adjust chase speed on both sequencers, nothing. Fuse checked where Sequencer plugs into - that’s good. Same box that has AC cord verified plugged in at main fuse panel area.

Please help.

[Ron Rich]

Kevig,
If both control units work in another phono, the problem must be in the non-working phono. How many burned out lamps are in the STD-2 ? Are both sections plugged in ? If so, try un-plugging the lower section -- if blinking now, the problem is pinched wires in that section. Ron Rich

[keving]

Ron,

Both top and bottom light sections are illuminated with what looks to be 2-3 lights not lit up. So unplug each,re-plug them in and see what it does?

[Ron Rich]

Keving,
If you are 100% sure both 5 bit control units work in the other phono, I would almost have to guess someone changed the lamps in the non-working unit to the wrong type (number) ? Should be 2182, or 2182D's Ron Rich

[keving]

The lady told me the lights used to chase, but no longer do at the moment. So I don’t think it’s a wrong bulb issue?

[Ron Rich]

Keving,
You have me confuzzed ? I understood that you have two phonographs -- on the STD-2 the lights only light, not sequence --correct ??
On the 2nd phono the lights work--but with both sequencers ?? (yes--for SURE-or no ??)Ron Rich

[keving]

Ron,

Sorry for the confusion. A lady down the road has an Entertainer with the Chase lights at a standstill. My Entertainer’s chase lights worked fine. I took my sequencer and swapped into her machine where she is still having the same problem - chase lights at a standstill. I have not been able to put her sequencer into my machine as she lives about an hour away.

[Ron Rich]

Keving,
I dono--ain't never seent dat happen ?? Let me know what you find -- Ron Rich