|
|
Post by dave405 on Feb 9, 2019 3:46:35 GMT
What is the noise maker for on a AMI G120 and what makes it work??
|
|
|
|
Post by robnyc on Feb 10, 2019 0:44:58 GMT
It is just a solenoid connected to the selection system that makes a noise when a selection is made to tell the customer it was registered.
RobNYC
|
|
|
|
Post by dave405 on Feb 10, 2019 0:59:13 GMT
Thank you the one on mine don't do anything. Would you happen to know what the paint color names are on a red G120 I need to repaint the one I have the paint is in bad shape.
Thank You for your time
|
|
|
|
Post by Hildegard on Feb 11, 2019 21:39:09 GMT
The color was called "Firecracker Red". If you can find some original, not worn paint below a trim or so, I'd take that sample to a professional painter shop. Ask them to mix this color for you. Unless one can buy "firecracker red" as a regular color.
Hildegard
|
|
|
|
Post by Ron Rich on Feb 12, 2019 3:54:17 GMT
Hi Hildegard,
As far as I know ( which ain't much !) the only red that is somewhat universal -- sold as a "named color" is, "Coca-Cola red". Ron Rich
|
|
albert
Junior Member
Living in Sthwst Florida
Posts: 68 
|
Post by albert on Feb 12, 2019 11:55:40 GMT
his suggestion of pulling a small chip of color is right on. Home depot and or lowe's can match it up exactly. I've done it several times with my hobbies and home. only question would be type of paint Oil base, acrylic etc, etc. And or Gloss or Super gloss?? I have a G120 that was made with the Panel look. When finished I will paint it Red oil based Gloss. Hope this helps. Al
|
|
|
|
Post by Hildegard on Feb 13, 2019 9:48:55 GMT
I just read in another brochure the color being "cherry red". About the surface they say
"The cabinet is protected against hard usage by a tough clear film of Rel-Var, resulting in a surface that is impervious to alcohol. acetone and other thinners, and will even resist cigarette burns."
No words whether it is glossy, supper glossy, a satin finish or whatever. But I'd say it's not super glossy.
Hildegard
|
|
