|
|
Post by killerbooger on Mar 26, 2020 1:48:41 GMT
Hello, new to this site and am new to Jukeboxes so going to need a little help. Good news is I do a lot with arcade games and pins so I am not a total noob when it comes to this kind of stuff. I came across a couple machines and thought I would start on this one first. I have made a few repairs and replaced some worn parts. The carousel is spinning nicely now and it is going back to the home position as it should now. Here is the challenge I am having:
1: If I make a selection no matter what it is the "digital readout" always shows the B side.
2: When I make a selection the contact plate and blade assembly move to the right place it appears but the carousel doesnt move. 3: If I select A1 and 2 only the A1 pin is coming up.
Good place to start. I have tried going through the manual and have gone through some steps but the language seems to change as it goes a little and in that is says to make a selection, sometimes it mentions putting in a credit and sometimes it doesnt. I think I have gone as far as I can without some advice.
|
|
|
|
Post by Ron Rich on Mar 26, 2020 2:57:17 GMT
Is this a "WurliTzer" made in the USA, or Germany ? I'm not familiar with that model number, so I can't even make an "educated guess".
Maybe someone elsee can ?? Ron Rich
|
|
|
|
Post by killerbooger on Mar 26, 2020 16:45:58 GMT
Its a 3600 I fat fingered the model.
|
|
|
|
Post by Hildegard on Mar 26, 2020 20:51:50 GMT
|
|
|
|
Post by Ron Rich on Mar 26, 2020 21:45:55 GMT
Yep-- a 3600 is a whole lot different ani-mal from a 6300 ! Did you read the simplified explanation of how a jukebox works in the FAQ's section ?
"Credit" ALWAYS must be established, prior to a jukebox "working"-- Does your record basket home correctly ? If you start it in motion with the service switch, does it continue to search(scan) two revolutions, then home ? Are you returning that switch to the "operate" position ? Ron Rich
|
|
|
|
Post by killerbooger on Mar 27, 2020 1:29:39 GMT
Hey Ron. Yes and Yes.
|
|
|
|
Post by Ron Rich on Mar 27, 2020 2:43:02 GMT
OK--so what/where in the normal sequence of operation, is failing ?? Ron Rich
|
|
|
|
Post by killerbooger on Mar 27, 2020 16:00:47 GMT
Insert credit, make selection, lower mechanism turns, turntable activates, carousel never moves.
|
|
|
|
Post by Ron Rich on Mar 27, 2020 17:02:16 GMT
Does it release a pin, on the ES ? Ron Rich
|
|
|
|
Post by killerbooger on Mar 27, 2020 18:54:46 GMT
It does release the pin.
|
|
|
|
Post by Ron Rich on Mar 27, 2020 18:58:03 GMT
OK--you failed to mention that fact-- Does it energize the "add" coil, on the play control assembly ? Ron Rich
|
|
|
|
Post by killerbooger on Mar 28, 2020 17:06:33 GMT
On the "add" coil would it be called something else in the manual. All I know is what the part is called in the manual as I went through the test and adjustment tests. I dont see anything called an "add" coil.
|
|
|
|
Post by Ron Rich on Mar 28, 2020 17:17:46 GMT
Yes--very well could be--that why I put it in () ! It's the scan start coil, in the rear of the record basket--(which, SHOULD BE), under a small cover-- Has one set of contacts under it that tend not to make good contact, plus often times (especially if no cover !) tends to "get dirty", mechanically. Ron Rich
|
|
|
|
Post by killerbooger on Mar 30, 2020 19:13:29 GMT
It is functioning and working correctly with the brake in the front. The cover is missing, so I did have to clean and lubricate it to get it to function smooth. Im going to take a video of it and make a private youtube and leave a link here. That might help
|
|
|
|
Post by killerbooger on Mar 30, 2020 20:29:28 GMT
Here is the link to the video. just click the link. This is what happens after I select free play and make a selection. When I turn it on the turntable starts turning, made selection, and then you can see what it does. I hope this helps. www.youtube.com/watch?v=paTkmwYAt_M |
|
