|
|
Post by rascalian69 on Oct 9, 2023 18:26:03 GMT
Do we have a picture or a part in the manual that will tell us the proper adjustment of the transfer switch?
Also to let you know I do not have any motor action when I press the solenoid selector.
I keep thinking that I might have a combo issue, mechanical ( clutch, misalignment,canceling arm.... and an electrical issue with the transfer switch?
|
|
|
|
Post by jukeboxmarty on Oct 9, 2023 18:55:35 GMT
Based on your video (which doesn't show this switch well), it appears that the actuator withdraws but the switch itself doesn't snap into position. There is a spring on the switch that should force it to return when the paddle in not depressed.
This switch is responsible for the reversing of the main motor which would prevent the carousel from turning.
Checking and fixing this switch may resolve most of your issues.
Proper adjustment can only be carried out once the switch actuates properly.
|
|
|
|
Post by jukeboxmarty on Oct 9, 2023 19:14:13 GMT
Page 21 and 22 in the service manual, "Transfer Switch Adjustment" may give you more insight on the workings of the switch.
|
|
|
|
Post by rascalian69 on Oct 10, 2023 16:56:06 GMT
Thank you, yes I really think it will fix most of the issue. When I was having the " wurlitzer shuffle " issue originally the transfer switch was getting hammered, it might got damaged. And I lost the little spring, find an other one but was a little bit more stiff than the original. I am posting a video more centered on the switches. Therefore you might be able to better view and assess the issue(s) youtube.com/shorts/TSeYAUxEvh0?si=pN_7BuR2VED5TAFByoutube.com/shorts/08yyMMRtwhA?si=jdiWuw81ne5KKqRRHopefully all our post and video will help other aficionados 😊. |
|
|
|
Post by jukeboxmarty on Oct 10, 2023 17:03:23 GMT
Just glanced at the videos. Neither switch is actuating correctly. 😮
|
|
|
|
Post by rascalian69 on Oct 10, 2023 17:14:06 GMT
|
|
|
|
Post by rascalian69 on Oct 10, 2023 17:21:37 GMT
|
|
|
|
Post by jukeboxmarty on Oct 11, 2023 0:13:33 GMT
Now that you have switches that presumably snap back and forth properly, you can compare them to the switches you have to see why they are failing.
Of course if one of your original switches has the wrong spring as you indicated, that switch probably won't work until it has the correct spring.
I'm pretty sure you can take it from here. 👍
|
|
|
|
Post by rascalian69 on Oct 11, 2023 5:37:33 GMT
OK the original switches weren't moving back on forward and the reverse switch was just holding in one place.
Now we installed the new harness with both switches acting like they should ( the 3000/3110 harness are identical to the 2800/2810)
So we installed it in place.
Infortunatly we still have an issue the turn table is continuously spinning.
It seems that it need more adjustment.
Nevertheless there is still something not working properly and I can't put my finger on it.
|
|
|
|
Post by rascalian69 on Oct 11, 2023 6:01:47 GMT
OK I think I find the issue, or at least a major one .
I was hold back on both of the back stop pawl
The carousel start rotating flawlessly but counter clockwise.
This my help now to understand what's going on?
Any idea why and how we can have it rotate the right way 😊?
Thank you for your help, we defenitly need it 🤯
|
|
|
|
Post by jukeboxmarty on Oct 11, 2023 17:03:59 GMT
Why were you holding back the 'back stop pawls'?
They are there to prevent the carousel from turning backwards.
|
|
|
|
Post by rascalian69 on Oct 12, 2023 3:03:35 GMT
I don't know really why,desperation maybe 😫
I realized that it was not turning clocks wise then I said to myself let's try this.
The good news it's that it's turning really smoothly.
But beside this thats about it.
Also I realise there is no mor power to the selector solenoids,
I guess it's all related.
I have to admit, I am really stuck.
And I don't understand what to do.
|
|
|
|
Post by jukeboxmarty on Oct 12, 2023 4:16:07 GMT
Did you get those two switches functioning properly?
|
|
|
|
Post by maestroundefined on Oct 12, 2023 18:21:08 GMT
Well, in sorts, yes and no. The new switches I've put in spring back and forth properly and normally as compared to the first ones who did not, I have other problems now though.
The record spindle up top the carousel is spinning continously and does not stop unless I hold the switches back or reset the machine, also to note that the carousel basket now spins counterclockwise (if I hold the backstop pawls back lightly with my fingers, it's the only way it will go- not clockwise as it was previously.)
|
|
|
|
Post by rascalian69 on Oct 12, 2023 23:55:22 GMT
Do you or anyone has good pictures of the switches in order to see their actual position ( close/ open)
This will really help to start on a good solid base.
Thank you
|
|
